The Sony ZV-1 is a best-selling vlog tiny camera that was released in the middle of 2020. Sony ZV-1 is a purpose-built tiny camera that combines the RX100-series platform’s renowned photographic capabilities with an upgraded physical design for more efficient content creation.
Vloggers and influencers, rejoice: the Sony ZV-1 is a purpose-built small camera that combines the RX100-series platform’s proven photographic capabilities with an upgraded physical design for more efficient content creation.
The Sony ZV-1 is ideal for vlogging. Looking for the best gimbals for the Sony ZV-1? Take a look at the following:
Best Gimbal for Sony ZV-1
DJI RSC 2-3-Axis Gimbal Stabilizer
"The DJI RSC 2 accommodates up to 6.6 lb of camera and equipment. DJI's website has a list of compatible cameras and lenses.
The RSC 2's motors are 50% stronger than the Ronin- SC's. The RSC 2 folds for underslung mode.
You can spin the gimbal over and utilize it underslung for low-angle pictures without attaching or detaching anything. The integrated gimbal handle features 14-hour built-in batteries. Batteries can be charged via the handle while the gimbal is in use (unless in extreme heat/cold). The handle may be recharged in two hours with an 18W fast charger (not included). Foldable gimbals make transportation and storage easier.
RSC 2's 1 ""OLED black-and-white screen and horizontal dial for adjusting focus with the same hand as the gimbal. Each side of the gimbal handle has a NATO mount with M4 threading for attachments like a suitcase handle.
RSC 2 employs DJI Titan's enhanced stabilization algorithm for better stability and smoothness. The SuperSmooth works with up to 100mm zoom lenses to complement the algorithm. SuperSmooth reduces micromovements and boosts torque for long lenses.
The gimbal incorporates two replaceable Manfrotto and Arca-Swiss fast-release plates. A tap puts your camera in portrait mode for social networking. The RSC 2 comes with an iOS/Android app that offers time-lapse, panoramic, and Roll 360, which spins your camera constantly along the roll axis. The optional DJI RavenEye transmission device offers remote 1080p video transmission, ActiveTrack 3.0 subject tracking, and other functionalities.
The RSC 2 includes a 1/4-inch mini tripod ""-20 thread on the grip handle to operate as a stand or extension handle for a two-handed gimbal operation. Included camera control wires allow for direct camera and function control from the gimbal."
DJI Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal
"The DJI Ronin-SC Gimbal Stabilizer is smaller and lighter than its predecessor, the Ronin-S. It's designed for mirrorless cameras under 4.4 lbs. DJI's website has a list of compatible cameras and lenses.
The Ronin-SC is small but packed with features, design upgrades, and technology. The gimbal's stabilization, pan, tilt, and roll controls, plus 360° of continuous panning, generate solid 3D/360° motion shots.
The gimbal weighs only 2.4 lbs, making it ultra-portable and easy to handle for long periods. It has balancing and storage locking modes. The sliding quick release camera plate makes it easy to rebalance your camera after moving to a new location. Balance your camera in the balancing lock position. Unmount it with the plate, put the gimbal in storage mode, travel, remount your camera, unlock and turn on the gimbal, and voilà, your camera is still balanced.
The Ronin-SC has a record button, a joystick, and a re-centered front trigger button for accurate gimbal control. Holding the M button activates Sport Mode, which allows quick tracking when recording action sequences. Active Track 3.0 lets users track a subject with the gimbal using an Android or iOS app through Bluetooth 5.0. DJI's Force Mobile lets you control your gimbal's motion when it's mounted on a rig or tripod using your smartphone's gyroscope, allowing you to do more precise gimbal motions while utilizing your natural motion. Time-lapse and motion-lapse modes are built-in.
The Ronin-handle-mounted SC's 2450mAh 18650 LiPo battery lasts 11 hours per charge. It's charged through USB Type-C and can manage a compatible camera's run/stop or focus using a multiport USB cable. The handle has 1/4""-20 and 3/8""-16 mounting threads for accessories like the smartphone holder.
The Ronin-SC includes an extended grip/tripod, camera riser, lens support, port cover, Allen wrench, quick release plate with 1/4""-20 camera mounting screw, an M4 screw, multicamera USB control cables, multicamera USB Type-C control cables, a USB Type-C charging cable, a USB Type-C to micro-USB adapter, and a storage case."
Zhiyun Weebill S Gimbal, Standard Package
"The Zhiyun-Tech WEEBILL-S has the underslung mode design of the WEEBILL LAB and more compact size. The sling mode design includes a rear handle for quick switching to underslung mode and better handling in all other modes. Motors and a stabilizing algorithm have been improved. WEEBILL-S has 300% greater torque and 50% more responsiveness. This helps balance camera/lens combos like the Canon 5D Mark IV and 24-70mm lens.
The WEEBILL-optional S's TransMount Image Transmission Module allows wireless streaming of up to 1080p30 resolution over 328'. Using receiver modules, up to three phones, tablets, and professional monitors can be linked.
The iOS and Android Zhiyun-Tech ZY Play app now work with the Image Transmission Module for better gimbal control. SmartFollow 2.0 interacts with the module to offer app-based object tracking. Sync Motion allows real-time motion monitoring and control. ViaTouch 2.0 lets you control your camera and gimbal from your smartphone screen. Zoom, focus, ISO, aperture, and more are supported. Other ZY Play capabilities include Panorama, Timelapse, Motionlapse, and Long Exposure Timelapse.
WEEBILL-S has six modes. Full-Range POV Mode provides synchronized 360° movement in all three dimensions, and Vortex Mode offers 360° barrel shots. See below for descriptions of all six modes. Intelligent Auto-Tune instantly recognizes your camera's weight and adapts to it for maximum power efficiency. WEEBILL-S has a 14-hour battery life.
WEEBILL-S supports electronic focus control on compatible cameras. Using the handwheel. Zhiyun-Tech website lists supported cameras. Mechanical focus and zoom using supplementary motors are also supported. The WEEBILL-S is compatible with TransMount motors and accessories. Popular since its release is the Quick Setup Adapter Set."
Feiyu G6 Max 3-Axis Handheld Gimbal 3-in-1 Stabilizer
With the Feiyu G6 Gimbal, you can record motion-stabilized footage with your action camera even when you're on the run. The gimbal may be used with the GoPro HERO8, HERO7, HERO6 Black, and HERO5 Black, as well as with other action cameras that are around the same size and have a form factor that is comparable to those of the GoPro models. The gimbal is resistant to water splashes, but you should not immerse it or put it in salt water. It comes with a handgrip that can also be used as a battery holder and has controls for the gimbal and the camera built right into it. The rechargeable battery has a potential runtime of up to 12 hours.
DJI Ronin-S - Camera Stabilizer 3-Axis Gimbal Handheld
"The DJI Ronin-S is a scalable ecosystem for DSLR and mirrorless camera integration into professional workflows. Ronin-single-handed S's design allows for camera payloads up to 8 pounds. DJI's website has a list of compatible cameras and lenses.
The front trigger, rear mode button, and joystick provide accurate gimbal control. The front trigger locks the gimbal when held, re-centers it when tapped twice, and turns 180° when tapped three times. Pressing the mode button activates three adjustable shooting modes with tunable speed and reaction. Sport mode offers extra-fast response times and gimbal movements up to 45 mph. The Ronin-S fits documentary, event, and feature film workflows and operates 12 hours on a single battery charge.
Ronin-S includes everything needed to start shooting. A sliding camera mounting plate and riser secure your mirrorless or DSLR camera. Start/stop and focus pulling are controlled via USB Type-C and Type-B cables (depending on camera compatibility). The gimbal comes with a 24W USB charger. The provided case protects the gimbal and accessories during storage and transport."
Zhiyun Crane M2 [Official] Handheld 3-Axis Gimbal Stabilizer
"The Zhiyun-Tech Crane-2 is a 3-axis handheld gimbal that supports up to 7 lb. Balance your camera on the included Manfrotto-standard fast release plate and shoot for up to 18 hours. A rod-mount mechanical focus motor can be controlled by the gimbal's handwheel or a Crane 2 remote. It can be aligned to your lens' focus or zoom ring for follow focus or zoom. A support rod, USB cable, and two universal lens gear rings are included for attaching and connecting the focus motor.
Crane-2 supports digital follow focus through the gimbal handwheel for various Canon DSLRs and the Nikon D850 with autofocus lenses. After connecting the camera to the gimbal using the USB cords, you'll have direct follow focus control without an extra motor.
Crane-2 can pan, tilt, and roll 360°. Multiple shooting modes make the gimbal more creative. Full-range POV mode synchronizes all three axes for 360° movement. This means the camera will lock onto a single position and follow your motions without stopping. This captures POV.
Onboard controls and an OLED display modify gimbal settings. ""Slow-fall"" feature prevents camera drop when Crane-2 is turned off."