How to Change Ring Doorbell's Wifi

Ring is known for providing some of the most cutting-edge home security products available in the United States. The Ring Doorbell is one of the most well-known of these products. It is a Wi-Fi doorbell that gives you the ability to see and communicate with guests at your home using your smartphone regardless of where you are. Although it is a wonderful piece of hardware that comes packed with functions, using it without access to the internet would limit its potential.

On the other hand, there are bound to be instances in which you will be required to adjust the Wi-Fi settings on your camera. You could have relocated to a new location, or you could have upgraded your wireless router. As a consequence of this, it is essential to be familiar with the process of adjusting the Wi-Fi settings on the doorbell. Continue reading if you want to learn more.

How To Change Wifi On Ring Doorbell

  • To begin, make sure you have The Ring application open.
  • To access the menu, select the icon with three horizontal lines in the upper left corner.
  • To access your devices, select the Devices option.
  • Choose Your Ring Doorbell model.
  • Select the “Device Health” option from the menu.
  • Choose the option “Change Wi-Fi Network” from the menu.
  • Proceed to the place indicated by the doorbell.
  • To put your device in the setup mode, follow the instructions that appear on the screen and do what they say.
  • Choose the Wi-Fi connection that best suits your needs.
  • After entering the Network Password, click the box that says “Continue.”
See also  Resolve Arlo "Maximum of 5 Camera Streams are Supported Simultaneously" Error

Ring Doorbell Set-up Mode

You will need to put the device in set-up mode before you can make any changes to the Wi-Fi connection. On the other hand, this process is not replicated exactly across all of the devices.

To use the Ring Video Doorbell, first remove the doorbell from its mounting bracket, and then press the orange button located on the doorbell’s back.

To set the ring volume on the Ring Doorbell 2, 3, 3 Plus, or Elite, remove the faceplate and press the black button located on the doorbell’s front area.

 Ring Doorbell Pro-Tap on the button in the right side of the doorbell.

Changing the Ring Doorbell Password

  • Ring must be started by tapping the button with three lines in the upper left corner of the screen after the app has been launched.
  • Select the Account menu item, then click the New Password button.
  • In the field provided, type in the password you’ve been using.
  • Now, key in the new password, and after that, verify that it is correct.
  • As a result, the previous password for your Ring Doorbell has been replaced with a new one.

In addition, pls take note that the password needs to be at least 8 characters long, and in addition to letters, it should contain both numbers and special characters.

Choosing the Ring Doorbell Wi-fi Frequency

Wi-Fi routers typically operate at two distinct frequencies, known respectively as 2.4 and 5 GHz. The frequency at 2.4 GHz has a greater range than the frequency at 5 GHz, but it transmits data at a slower rate. In addition to this, make sure you are aware of the frequencies that are compatible with your doorbell. There are certain variants that are only compatible with a single frequency. If you have a Wi-Fi router that supports dual bands, you will have the ability to choose the frequency that best suits your needs. Selecting the 5 GHz frequency will provide you with the quickest possible connection.

See also  What is Gimbal? How does it Work?

How to Prevent Changing The Ring Doorbell WiFi Network

Altering the credentials, such as the password, should be avoided if at all possible; however, there are circumstances in which altering the Wi-Fi network is needed.

  • Getting a New WiFi Router

If you have recently upgraded your Wi-Fi router, it is recommended that you keep the same password and SSID that you have been using. As a direct consequence of this, your device will immediately become linked to the Wi-Fi network. If you decide to alter the username and password for the network, the Wi-Fi settings on these devices may require some adjustment on your part.

  • Avoid Changing from WPA to WPS Security

It is strongly recommended that you refrain from switching the security type from WPA2 to WPS. This is due to the fact that WPS provides an inadequate level of security for the WiFi, and if you alter the type of security, you will also need to update the WiFi settings on your doorbell.

In addition to that, we suggest that you purchase the Ring chime Pro. The device, which is essentially an extender for your Wi-Fi network, has a chime that it plays whenever the doorbell rings. Connecting to it is likewise quite simple and uncomplicated.

Why Change Wi-fi On The Ring Doorbell?

In the event that you switch your Internet Service Provider or alter the name or password of your WiFi network, you will be required to update the WiFi settings inside the Ring app. In addition, in the event that the connection is unreliable, there will be moments when you will be required to manually connect the device to the Wi-Fi network.

See also  What is Vantage Points in Photography & How To Use?

In addition, if you need to use the mobile hotspot because there is a power outage, you will also be required to change your Wi-Fi connection in order to do so.


We sincerely hope that this explanation on how to change the Wi-Fi settings on your Ring Doorbell was helpful. The procedure is not overly complicated and is one that each Ring owner should be familiar with. Please contact us if you have any questions regarding the article’s content.

Leave A Reply

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.