instax mini 40 flashing light 12832

Instax Mini 40 Flashing Light: Troubleshooting and Solutions

If you’ve encountered a flashing light on your Instax Mini 40 camera, you’re not alone.

This common problem can be frustrating when you’re trying to capture the perfect moment. The flashing light typically indicates that the flash is charging and not ready to take a picture.

The good news is that this issue is often easily resolved by allowing the flash to fully charge before attempting to take a photo.

Quick Answer: If you’re experiencing a flashing light on your Instax Mini 40 camera, it’s likely due to the flash charging. Give it some time to fully charge before attempting to take a photo. If the issue persists, check for low batteries, jammed film, or a dirty lens.

3 Common Reasons for a Flashing Light

1. Low Battery

If the red light near the viewfinder persists or refuses to turn off, it’s likely a battery-related problem. The Instax Mini 40 relies on two AA batteries for optimal performance. Replace old batteries with fresh ones to resolve this issue promptly.

2. Jammed Film

A jammed film can also trigger the flashing light problem. Ensure proper film loading by aligning the yellow marks on the film pack and the camera. Open the back cover, remove the film pack, reload it correctly, and close the cover.

3. Dirty Lens or Flash

A cloudy lens or flash can disrupt the camera’s functionality. Safely clean the lens and flash using a soft, dry cloth to maintain optimal performance. Avoid water or cleaning solutions to prevent damage.

Decoding the Instax Mini 40 Flashing Orange Light

Encountering a flashing orange light on your Instax Mini 40? This signals an issue with the camera’s flash system, with common culprits being dead batteries, flash charging errors or a malfunctioning flash system.

How to Fix the Flashing Light Issue on Instax Mini 40

If your Instax Mini 40 is plagued by a persistent flashing light, follow these steps:

1. Replace the Batteries

Ensure your camera never runs out of power by replacing dead or weak batteries with high-quality ones. Having spare batteries on hand is advisable for avid photographers.

2. Reset the Camera

Power down the camera, remove the batteries, wait a few minutes, reinsert the batteries, and turn the camera back on. This simple reset can often resolve charging errors.

3. Seek Professional Assistance

If the flashing light persists, it might indicate a deeper issue with the flash system. Contact the manufacturer for repair options to ensure your camera’s long-term functionality.

Instax Mini 40 Flashing Light Not Taking Pictures

If your Instax Mini 40 is flashing but not capturing images, consider the following troubleshooting steps:

1. Proper Film Loading

Ensure the camera is correctly loaded with film, as it won’t take pictures without it. Confirm the film is loaded correctly, and there’s film in the camera.

2. Check Exposure Settings

Incorrect exposure settings may hinder the camera’s ability to take pictures. Adjust the settings accordingly and attempt to capture your moment again.

3. Experiment with Shooting Modes

Switching to a different shooting mode might resolve the issue. If the camera is set to a specific mode, trying an alternative could kickstart its picture-taking functionality.


After extensive research and analysis, it’s evident that the Instax Mini 40’s flashing light may stem from various issues. From low batteries to flash system malfunctions, this guide equips users with the knowledge to address these concerns effectively.

Always consult the user guide for detailed instructions on camera operation and troubleshooting. With proper care and maintenance, the Instax Mini 40 remains a delightful tool for capturing memories on the go, promising an instant and enjoyable photography experience.

Instax Mini 40 Flashing Orange Light FAQs

Q: Why is my Instax Mini 40 not turning on?

Ensure correctly inserted and charged batteries. If the issue persists, try resetting the camera by opening and closing the lens cover. For persistent problems, contact customer support.

Q: How long does it take for the flash to charge on Instax Mini 40?

The flash typically takes 0.2 to 0.6 seconds to charge. If issues arise, consider battery replacement or resetting the camera.

Q: How do I reset my Instax Mini 40?

Open and close the lens cover to perform a basic reset. If problems persist, removing the batteries for a few minutes may provide a more thorough reset. Contact customer support if needed.

Scroll to Top