why does my instax camera say s 12889 1

Why Does My Instax Camera Say S?

If you’re a proud owner of an Instax camera, you might have encountered the mysterious “S” displayed in the film counter window.

The “S” on your Instax camera indicates “Start.” It appears after removing an empty film cartridge or until you eject the black sheet by pressing the shutter button with loaded film.

Fear not; this article will guide you through the intricacies of Instax Mini models, including the 7+, 7s, 8, 9, and even the Wide 300, and decipher the reasons behind the persistent “S” on your camera.

Instax Mini 7+ – Decoding the “S”

The Fujifilm Instax Mini 7+ is a classic that introduced us to the world of instant photography. The “S” in the film counter window signifies either the presence of film or the camera’s readiness to eject the protective black sheet of paper.

image

If you find Instax Mini 7+ stuck on “S,” here’s what you can do:

1. Eject the Dark Slide

Ensure you’ve ejected the dark slide (black paper) from the film cartridge after loading. Press the shutter button after turning on the camera to initiate the process.

2. Check Expiry Date

Expired film can impede proper functionality. If the film is beyond 12 months from its expiration date, consider replacing it with a fresh Instax Mini film pack.

3. Power Up with Fresh Batteries

Low-power batteries or incorrect battery types may lead to the “S” conundrum. Fujifilm recommends using 4 fresh alkaline batteries for optimal performance.

4. Reset if Necessary

Should the issue persist, try resetting your Instax Mini 7+ by extending the lens, removing the batteries for 15 seconds, and then reinserting them.

5. Stuck Film or Dark Slide

If the film or dark slide becomes stuck during ejection, refrain from pulling it forcefully. Instead, attempt a reset or turn the camera off and on again.

Instax Mini 7s – Unraveling the Mystery of “S”

Similar to its predecessor, the Instax Mini 7s might also showcase the enigmatic “S” in the film counter window.

image 2

What to do if your Instax 7s is Stuck on S? Here are steps to troubleshoot:

1. Dark Slide Ejection

Ensure you’ve properly ejected the dark slide from the film cartridge after loading. Follow the same process as with the Mini 7+.

2. Check Expiry Date

Expired film may disrupt the ejection process. Replace the film cartridge with fresh Instax Mini film if it’s past its expiration date.

3. Optimal Battery Power

Confirm the camera’s batteries are sufficiently charged. Use 4 fresh alkaline batteries, adhering to Fujifilm’s recommendations.

4. Reset Mechanism

Perform a reset by extending the lens, removing the batteries for 15 seconds, and then reinserting them if needed.

5. Handling Stuck Film

Exercise caution if the film or dark slide gets stuck. Avoid forceful attempts to pull it out; instead, consider a reset or turning the camera off and on again.

Instax Mini 8 – Navigating the “S” Quandary

Released in 2012, the Instax Mini 8 is a compact and popular instant camera.

image 1

What to do if your Instax Mini 8 is Stuck on S? Follow these steps:

1. Dark Slide Ejection

Initiate the film process by pressing the shutter button after loading the film pack to eject the dark slide.

2. Verify Expiry Date

Replace old film packs with fresh ones if they’ve surpassed their 12-month expiration period.

3. Battery Check

Ensure optimal battery power by using 2 fresh AA alkaline batteries, adhering to Fujifilm’s recommendations.

4. Reset Mechanism

If the issue persists, perform a reset by turning the camera on, removing the batteries for 15 seconds, and then reinserting them.

5. Stuck Film or Dark Slide

Avoid forceful actions if the film gets stuck. Opt for a reset or turning the camera off and on again.

Instax Mini 9 – Addressing the Persistent “S”

image 3

An upgrade from the Mini 8, the Instax Mini 9 introduces additional features. If you encounter the Instax Mini 9 shows an “S” dilemma, try the following:

1. Proper Dark Slide Ejection

Press the shutter button after loading the film pack to eject the dark slide and transition to “10” in the film counter window.

2. Check Expiry Date

Replace expired film with a fresh Instax Mini film pack if necessary.

3. Battery Health

Ensure optimal battery power using 2 fresh AA alkaline batteries, adhering to Fujifilm’s recommendations.

4. Resetting the Camera

Perform a reset by turning the camera on, removing the batteries for 15 seconds, and then reinserting them if the problem persists.

5. Stuck Film or Dark Slide

Exercise caution if the film gets stuck. Opt for a reset or turning the camera off and on again.

Instax Mini 11 – Demystifying the “S” Challenge

image 5

Released in 2020, the Instax Mini 11 boasts automatic exposure for user-friendly operation. If you’re confronted with the “S” dilemma, here’s what to do:

1. Dark Slide Ejection

Press the shutter button after loading the film pack to eject the dark slide and transition to “10” in the film counter window.

2. Confirm Expiry Date

Swap out expired film with a fresh Instax Mini film pack.

3. Battery Optimization

Ensure optimal battery power using 2 fresh AA alkaline batteries, adhering to Fujifilm’s recommendations.

4. Resetting Procedure

If issues persist, perform a reset by turning the camera on, removing the batteries for 15 seconds, and then reinserting them.

5. Stuck Film or Dark Slide

Handle stuck film cautiously, opting for a reset or turning the camera off and on again.

Instax Wide 300 – Resolving the “S” Mystery

image 4

The Instax Wide 300 stands out with larger prints. If you encounter an “S” or a lack of “10” in the LCD window, consider these solutions:

1. Dark Slide Removal

Press the shutter button to eject the dark slide and initiate the display of “10” in the LCD window.

2. Check Expiry Date

Swap out old film packs with a fresh Instax Wide film pack if they’re beyond their expiration date.

3. Battery Health

Ensure sufficient battery power by using 4 fresh alkaline batteries, as recommended by Fujifilm.

4. Reset Mechanism

Perform a reset by inserting the correct batteries, extending the lens, removing the batteries for 15 seconds, and then reinserting them.

5. Stuck Film or Dark Slide

Exercise caution if the film gets stuck. Opt for a reset or turn the camera off and on again.

Conclusion

The “S” mystery on your Instax camera doesn’t need to be a cause for concern. By following these troubleshooting steps, you can unlock the full potential of your Instax Mini or Instax Wide camera.

Remember to handle the film and dark slide with care, adhere to Fujifilm’s battery recommendations, and enjoy capturing instant memories without the perplexity of the elusive “S.”

Scroll to Top