Blink cameras are a popular choice for home security systems. They are easy to install and use, and they provide a reliable way to monitor your home. However, like any electronic device, Blink cameras require batteries to function.
In this article, we will discuss how to change batteries in Blink cameras.
Table of Contents
Why Change Batteries in Blink Camera?
Blink cameras are powered by lithium-ion batteries, which have a limited lifespan. Over time, the batteries will lose their charge and need to be replaced. If you don’t replace the batteries, your Blink camera will stop working, leaving your home vulnerable to intruders.
What You Need to Change Batteries in Blink Camera
Before you start changing the batteries in your Blink camera, you need to make sure you have the right tools. Here’s what you’ll need:
- New lithium-ion batteries
- Screwdriver
- Mounting bracket
Steps to Change Batteries in Blink Camera
Now that you have the tools you need, it’s time to change the batteries in your Blink camera. Here are the steps you need to follow:
- Remove the mounting bracket: The first step is to remove the mounting bracket from the Blink camera. To do this, use a screwdriver to remove the screws that hold the bracket in place.
- Remove the back cover: Once the mounting bracket is removed, you can remove the back cover of the Blink camera. To do this, push down on the little arrow on the back cover and slide it off.
- Replace the batteries: With the back cover removed, you can now replace the old batteries with new lithium-ion batteries. Make sure to match the positive and negative ends correctly.
- Reattach the back cover: Once the new batteries are in place, you can reattach the back cover of the Blink camera. Simply slide the cover back into place and make sure it clicks into place.
- Reattach the mounting bracket: Finally, reattach the mounting bracket to the Blink camera using the screws you removed earlier.
Indoor (Gen 1), Blink Mini, and Older Models
- Gently lift the back cover by pulling upwards while holding the camera horizontally. A forceful tug might be required due to the camera being air-tight.
- Insert two fresh AA 1.5V lithium non-rechargeable batteries, ensuring proper alignment of the plus (+) and minus (-) symbols.
- Close the back cover and align the post with the keyhole next to the camera’s USB port. Push firmly to ensure a secure fit.
Blink Outdoor and Indoor (3rd Gen)
Before beginning, ensure the camera is disconnected from any mounts or accessories.
- Locate the screw near the back cover and turn it counterclockwise to loosen it.
- Using the provided opening tool or a suitable alternative like a coin or small screwdriver, carefully pry the back cover away from the camera.
- Place two fresh AA 1.5V lithium non-rechargeable batteries inside the battery compartment, making sure the polarities match.
- Securely attach the back cover again, aligning the guide notches, and hand-tighten the screw clockwise until snug without over-tightening.
Tips for Changing Batteries in Blink Camera
Here are some tips to keep in mind when changing the batteries in your Blink camera:
- Use high-quality lithium-ion batteries to ensure the best performance.
- Make sure to match the positive and negative ends of the batteries correctly.
- Keep spare batteries on hand so you can quickly replace them when needed.
- Check the battery level of your Blink camera regularly to avoid unexpected battery drain.
Conclusion
Changing the batteries in your Blink camera is a simple process that can be done in just a few minutes. By following the steps outlined in this article, you can ensure that your Blink camera continues to function properly and provide reliable home security.
Remember to use high-quality batteries and check the battery level regularly to avoid unexpected battery drain. With these tips in mind, you can enjoy the peace of mind that comes with knowing your home is protected.
FAQs
Q: How often should I change the batteries in my Blink camera?
A: Battery replacement frequency depends on factors like camera usage and battery type. As a general guideline, it is recommended to change the batteries every 4 to 6 months or as needed.
Q: Can I use rechargeable batteries in my Blink camera?
A: Yes, you can use rechargeable batteries as long as they are compatible with your Blink camera model. However, make sure to follow the manufacturer’s recommendations for rechargeable batteries.
Q: Will changing the batteries erase my Blink camera’s settings?
A: No, changing the batteries will not erase your Blink camera’s settings. The camera retains its settings even when the batteries are replaced.
Q: How can I check the battery status of my Blink camera?
A: The Blink mobile app provides information about the battery status of your camera. You can check the battery level within the app to determine if it needs replacement.
Q: Can I use third-party batteries in my Blink camera?
A: It is recommended to use batteries recommended by the camera manufacturer or official replacements to ensure compatibility and optimal performance.
